How to Clean Cellular Shades Easily: Proven Home Techniques

The cellular shades, also known as honeycomb shades, have a distinctive stratified construction that entraps air in the cells.

Smooth look, light regulation, and power efficiency are some of the reasons these shades are a wise investment in the interior design of the current times.

How to clean cellular shades easily at home? The accumulation of dust renders the fabric dull as well as decreases insulation by obstructing the movement of air through the honeycomb cells. 

Maintaining their cleanliness will avoid the spreading of allergens and keep your living environment clean, and further increase the durability of your shades.

How Often Should You Clean Cellular Shades?

The frequency of cellular shade cleaning is determined by the surroundings. When you have a window to the road or pets, then you should not clean them too hard; once a week is good. In less dusty houses, once every two months is alright.

To remove the dirt that is between, you can give your cellular shades a deep clean every three months. Fabric is maintained regularly to keep it bright and soft, and odorless. You will be able to keep the beauty and the functionality of your shades the whole year round by keeping a simple cleaning schedule.

Step-by-Step Guide: How to Clean Cellular Shades

Step 1: Dusting with a Vacuum or Duster

The initial process in how to clean cellular window shades is the removal of loose dust. Vacuum cleaner with brush attachment, or use a microfiber duster. Beginning at the top and then down in even strokes. This can assist you in plunging dust into the pleats even more.

Wipe the shade on either side to have a complete clean. A can of compressed air can also be used to loosen the stubborn dust between the folds. Frequent dusting keeps the shades shining, discoloration is minimized, and deep cleaning is simplified later on.

Step 2: Spot Cleaning Stains

In case you find spots or fingerprints, the ideal method to clean cellular shades will be spot cleaning as opposed to soaking the piece of fabric.

Add some drops of weak detergent to warm water. Wipe the stained part using a clean sponge that has been dipped into the solution.

Do not scrub or twist the cloth. Alternatively, place a towel on it until the stain vanishes. Wipe off with another sponge of water and allow the shades to dry off. Such a mild procedure eliminates stains and keeps the shape of the shade and the quality of the fabric.

Step 3: Deep Cleaning Cellular Shades

Deep cleaning is useful when there is a lot of dust or stains on your cellular window shades. Take the shades down and put them in a clean bathtub containing warm water and light soap. Shake them softly to remove dirt; however, do not twist or wring.

Rinse under clean water after a few minutes. Hang them at the edge of the tub in order to dry them using a towel.

When they are dry, again fasten them to your window. Deep cleaning would bring back the freshness and ensure your shades look new.

Step 4: Using a Hair Dryer or Compressed Air

There are occasions when dust gets deep in the honeycomb cells where the duster cannot reach. The use of a hair dryer with a cool or low-heat setting is ideal in this case. Add blow air in each cell to expel the trapped dust. A can of compressed air can also be used.

It is a simple and non-harmful method of how to clean cellular shades in a way that will not be harmful. It ensures the flow of air in the cells is smooth, which ensures the efficiency of insulation and the avoidance of unpleasant smells.

Best Way to Clean Cellular Shades Without Taking Them Down

In case you do not want to take your shades out, there is a simple way. Wipe the two sides with a microfiber cloth and a handheld vacuum. Begin at the top, and clean in a gentle manner so as not to eliminate pleats.

Light stains can be removed with a microfiber cloth that has been somewhat wetened with water. It is fast, easy, and will not be harmful to the delicate fabrics. 

It is also perfect, provided you wash frequently and do not require a deep wash. This serves mostly as the most effective method to wash cellular shades in the event you require expediency.

How to Clean Different Types of Cellular Shades

Light-Filtering Cellular Shades

Cellular filter shades are light filters of soft fabric to allow natural light in but block glare. In order to wash them, do not use harsh scrubbing or strong detergents.

Gentle vacuuming should be used, and in the case of stains, a soft sponge should be used with a solution of mild soap. This is used to preserve the texture of the fabric and maintain the quality of light.

Room-Darkening or Blackout Cellular Shades

These shades are more opaque, and they are meant to keep out light. Wash them by repeating the same, but adding less water.

Clean up with a moist cloth. The back layer should not be very wet because wetness is known to make the light-blocking coating weak.

Motorized Cellular Shades

In the case of motorized ones, remove power when cleaning. Dust with a dry microfiber cloth or a spray cleaner should not be sprayed anywhere close to the motor or battery. Corner cleaning can be done using a small brush. 

These steps show how to clean cellular window shades effectively without damaging electronic components.

Common Cleaning Mistakes to Avoid

In the course of knowing how to clean cellular shades, you ought to avoid making mistakes that may spoil them.

• Too moist: An excess of water will destroy the adhesive in the interior of the pleats.
• Avoid using strong cleaners: The fabric can suffer from fading or lose strength because of the strong cleaners.
• Skip scrubbing: This is where hard scrubbing is used to flatten the cells.
• Do not dry it beforehand: Wet clothes can hold smells or be stained in the future.

These errors will make your shades last several years, keeping their color, shape, and quality.

Maintenance Tips to Keep Cellular Shades Looking New

To have your cellular shades clean, it becomes easier when you observe several simple habits:

1. Vacuum/Feather duster: Vacuum or feather-dust the area once a week.

2. Test the stains: Wipe the small spots before the expansion.

3. Manual: Raising and pulling down of shades should be done in a manner that does not cause strain.

4. Turn it here and there: When one side of a shade is exposed to the sun all day long, turn it or reverse it now and then to avoid dying.

These are habits that enable you to appear clean, and yet the fabric will remain healthy and strong.

When to Replace Instead of Clean

Cellular shades do not last long, even with good care. When you see discoloration that does not come off, fraying edges, or damage to the honeycomb structure, then it might be time to change them.

Cleaning is not always a good investment anymore when what is needed is a replacement that improves the look or performance. New shades provide better insulation, better style, and a cleaner and fresher appearance to your home.

Conclusion

Knowing how to clean cellular shades properly is key to maintaining their look and performance for many years. All window cleaning and maintenance ensures your windows are fresh, bright and stylish, and also enhances air quality at home.

At Bringnox, we think that all homes should have comfort and beauty with ease. We are here to make sure that you can maintain the appearance of your shades with ease by using easy methods of cleaning that you can rely on.

These are some of the home techniques that will guarantee a fresh taste. And begin keeping your shades—you will find your windows grateful!

FAQs About How to Clean Cellular Shades

Q1. Can you wash cellular shades with water?

Yes, but then they must be very dirty and made of stuff that can be washed. Washing must never be conducted without checking the label of the manufacturer. Wash with weak soap and lukewarm water and do not wring the garment.

Q2. What is the best way to clean cellular shades daily?

Cellular shades may be washed either by vacuuming or wiping with a microfiber cloth, which is the most appropriate every day. This ensures they are not accumulated with dust.

Q3. Can I steam clean cellular window shades?

No, avoid steam cleaning. The fabric is easily ruined by high temperatures and the pleats are easily distorted. Use gentle cleaning procedures to make them last longer.

Q4. How do I remove odor from old cellular shades?

Wipe off or sprinkle dry baking soda, e.g., around the cells overnight using a mix of baking soda and water. It also takes in smell without causing harm to the cloth.